{"id":126013,"date":"2023-06-23T13:09:00","date_gmt":"2023-06-23T13:09:00","guid":{"rendered":"http:\/\/www.boatsmartexam.com\/blog\/?p=126013"},"modified":"2024-08-21T20:30:53","modified_gmt":"2024-08-21T20:30:53","slug":"boating-diy-project-what-you-need-to-know","status":"publish","type":"post","link":"https:\/\/www.boatsmartexam.com\/blog\/boating-diy-project-what-you-need-to-know\/","title":{"rendered":"A DIY Boat Project: What to Know Before Taking One On"},"content":{"rendered":"\n

This summer couldn\u2019t be wasted. Not a second of it. Fresh out of a (very) long year of university, I knew I had to make my moments on the water<\/a> count. So, I did. <\/p>\n\n\n\n

It took me over six weeks, but I took an old tin boat that resembled a piece of Swiss cheese and turned it into a functional fishing boat \u2014 a DIY boat project. How? It all started at Christmas earlier that year.<\/p>\n\n\n\n

Any Canadian knows that the winter withdrawal from boating is . . .\u00a0long. Being a full-time student, part-time worker, and all-the-time DIY-er, I was craving a project I could throw some time into this upcoming summer. Something that would push me to learn encourage me to have fun, and get me back into the spirit of boating in Canada! <\/p>\n\n\n\n

The 40-year-old tin boat sitting upside down on a hill at my cottage was top-of-mind. Here’s the story!<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Claiming the Old Tin Boat<\/h2>\n\n\n\n

After some asking around during the winter months, I was cleared to take the \u2018tinner\u2019 and old outboard motor and fix it up! Fast forward to May, and it was finally time to start the DIY boat project I\u2019d been waiting to dive into all winter. <\/p>\n\n\n\n

There were so many steps that I started by writing a list of “to-do\u2019s” that included inspecting the boat, identifying any fixes needed, fixing the 9.9 hp outboard motor, buying my boating safety gear . . . and the list went on, adding up the dollars and cents.<\/p>\n\n\n\n

I had so many questions, like:<\/p>\n\n\n\n

    \n
  1. How would I patch up the holes in my old tin boat?<\/li>\n\n\n\n
  2. Who can fix my old 9.9 hp outboard motor?<\/li>\n\n\n\n
  3. What boat safety gear did I need? Where would I get it?<\/li>\n\n\n\n
  4. Where do I get my Ontario boating license?<\/li>\n\n\n\n
  5. Do I need boat insurance?<\/li>\n\n\n\n
  6. How do I launch my boat<\/a>?<\/li>\n\n\n\n
  7. What kind of life jacket do I need?<\/li>\n\n\n\n
  8. Do I need a Pleasure Craft License<\/a>?<\/li>\n\n\n\n
  9. What are the alcohol and boating rules in Canada?<\/li>\n\n\n\n
  10. What happens if I get caught in a storm?<\/li>\n<\/ol>\n\n\n\n

    And . . . what kind of snacks were good for a boat renovation project? All this thinking was making me hungry. <\/p>\n\n\n\n

    But the most sensible thing was for me to get started and figure it out along the way. After all, how hard could a DIY boat project be, right?<\/p>\n\n\n\n

    NOTE:<\/em>\u00a0It wasn\u2019t easy! I should have done more research beforehand \u2014 but now, you have this article to help you figure out everything you need to know to start your boating life on the water!<\/p>\n\n\n\n

    DIY Boat Question 1: How do I Fix a Tin Boat?<\/h2>\n\n\n\n

    Because the tin boat had been left outside for so many years, the old marine sealant had been weathered down and cracked. Ultimately, the boat was full of holes from years of use and weathering. The first step was to strip out all the old sealant with a paint scraper so that I could re-seal the holes.<\/p>\n\n\n\n

    NOTE:<\/em> If you\u2019re doing this, you\u2019ll want to sand these areas afterward so the reapplied sealant will stick as best as possible.<\/p>\n\n\n\n

    Then, I applied\u00a03M 5200 Marine Adhesive Sealant\u00a0<\/a>to all the holes and let it dry (this can be applied to various boats with holes or leaks).<\/p>\n\n\n\n

    Tackling the Transom<\/h3>\n\n\n\n

    Next, it was time to take on the boat’s transom<\/a>. For those who don\u2019t know, the transom is the stern cross-section of the boat. On a tin boat, it\u2019s a horizontal beam that reinforces the stern of the boat and holds the outboard motor on my tin boat.<\/p>\n\n\n\n

    After 15 years of sitting on the ground, the old transom had rotted away and needed to be replaced.<\/p>\n\n\n\n

    \"A<\/figure>\n\n\n\n

    Now, you may be thinking \u2013 that\u2019s easy. Just cut some wood into the proper shape, and that will do it, right? Wrong. <\/p>\n\n\n\n

    Crafting a proper transom is almost an art form. Because normal plywood is pressure and chemical-treated, it is more susceptible to rotting from the water if you don\u2019t seal it. There are marine-grade woods out there, too, but those will often cost you twice as much \u2014 and university debts aren\u2019t free.<\/p>\n\n\n\n

    After a quick trip to Home Depot, I crafted my transom to pick up 1\/2\u201d plywood and some waterproof deck stain. After cutting the plywood, I sealed the transom pieces with two coats of waterproof deck sealant to keep water out, which worked great. <\/p>\n\n\n\n

    It\u2019s been about five half-day trips so far, and the transom is holding steady!<\/p>\n\n\n\n

    \"A<\/figure>\n\n\n\n

    Of course, I could go into great detail about optional additions to the old tin boat that I added \u2014 things like seats, rod holders, fishing decks, fish finders, live wells, and more \u2014 but we\u2019ll leave that for another blog. <\/p>\n\n\n\n

    I can tell you that the first addition I opted for was a removable fishing deck made from the leftover plywood I had. It\u2019s quite convenient for casting and holding fishing gear. You should always keep in mind that adding extra wood to your boat makes it significantly heavier, so check\u00a0your boat\u2019s capacity plate\u00a0and make sure your motor has enough juice to get you upstream.<\/p>\n\n\n\n

    \"A<\/figure>\n\n\n\n

    DIY Boat Question 2: How Do I Fix My Outboard Motor?<\/h2>\n\n\n\n

    Unfortunately, I didn\u2019t have much time to learn how to fix my outboard engine<\/a> (and I\u2019m not that mechanically inclined). <\/p>\n\n\n\n

    I can tell you that there are tons of small engine mechanics, outboard motor professionals, and marinas that can service your outboard motor. Usually, if your motor has been sitting for a few years, it just needs a tune-up.<\/p>\n\n\n\n

    Once you fix your outboard motor, a good way to keep it in good working order is to use gasoline with no ethanol.<\/em> I like to use Shell High Test No Ethanol (also called Premium gas). It\u2019s a little more expensive, but it\u2019ll keep your motor running cleaner and longer.<\/p>\n\n\n\n

    \"An<\/figure>\n\n\n\n

    DIY Boat Question 3: What Boat Safety Gear Do I Need?<\/h2>\n\n\n\n

    To be quite honest, this wasn\u2019t my first thought when I took on the DIY boat project \u2014 or even my second thought. After countless hours learning all the rules, though, I\u2019ve summed it up for you quickly.<\/p>\n\n\n\n

    To boat safely in Canada, you are required to carry certain pieces of safety gear with you onboard at all times or risk a fine of $250 or more. The requirements vary for boat size, type, engine horsepower, etc., but I\u2019ll touch on the average requirements. <\/p>\n\n\n\n

    There are four types of Boat Safety Equipment<\/a>:<\/p>\n\n\n\n

      \n
    1. Personal Safety Equipment<\/li>\n\n\n\n
    2. Boat Safety Equipment<\/li>\n\n\n\n
    3. Distress Equipment<\/li>\n\n\n\n
    4. Navigation Equipment<\/li>\n<\/ol>\n\n\n\n

      I think it\u2019s worthwhile to mention that although it costs a few extra dollars to gather this equipment, it is<\/em> required by law, saves lives, and is used daily by boaters. Don\u2019t take this section lightly, especially if you\u2019re new to boating. <\/p>\n\n\n\n

      \"A<\/figure>\n\n\n\n

      A Boating Safety Equipment Checklist<\/h3>\n\n\n\n

      That being said, here\u2019s the list of essential equipment you need on your boat.<\/p>\n\n\n\n

      NOTE:<\/em> The list below is a general list for all boats. Not every piece of equipment will be required for your boat.<\/p>\n\n\n\n

        \n
      1. Lifejackets and personal floatation devices:<\/strong> one for every person onboard<\/a><\/li>\n\n\n\n
      2. Buoyant heaving line: at<\/strong> least 15m in length<\/li>\n\n\n\n
      3. Bailing device<\/strong><\/li>\n\n\n\n
      4. A<\/strong> life buoy:<\/strong> approved by Transport Canada<\/a><\/li>\n\n\n\n
      5. Bilge pump: <\/strong>either manual or electric<\/li>\n\n\n\n
      6. Manual propelling device: <\/strong>usually spare paddles<\/li>\n\n\n\n
      7. An axe: <\/strong>only for boats longer than 12 m<\/li>\n\n\n\n
      8. Re-boarding equipment: <\/strong>if the freeboard is greater than 0.5 m<\/li>\n\n\n\n
      9. Fire extinguisher: <\/strong>see the types of boats that require a fire extinguisher\u00a0here<\/li>\n\n\n\n
      10. Anchor:<\/strong> for\u00a0boats 9 m in length or longer<\/li>\n\n\n\n
      11. Watertight flashlight: <\/strong>can also be used as a navigation light in some cases<\/li>\n\n\n\n
      12. Flares: <\/strong>depends on the size and type of boat<\/li>\n\n\n\n
      13. Sound-signalling devices: <\/strong>must be audible for a minimum of 0.93 km.<\/li>\n\n\n\n
      14. Navigation lights:<\/strong> must be displayed during certain hours of the day<\/li>\n\n\n\n
      15. Radar reflector: <\/strong>check to see if your boat requires a radar reflector\u00a0here<\/li>\n<\/ol>\n\n\n\n

        Whew! That seems like a lot. I know. But once you have it all sorted out, it\u2019s easy to pack and keep in a gear bag. <\/p>\n\n\n\n

        Also, you can get some of the above in combined packages. For example, you can get a\u00a04N1 Safety Kit, which encompasses a bailing device, a sound-signalling device (a whistle), a buoyant heaving line, and a watertight flashlight. I have one, and it\u2019s pretty handy (check out the orange bucket on the boat floor by the fishing rods in this image).<\/p>\n\n\n\n

        \"A<\/figure>\n\n\n\n

        See why I said it was a lot of work? Yeah, it\u2019s a lot to learn. <\/p>\n\n\n\n

        But if you\u2019re dedicated to getting on the water, nothing will stop you. My first boat ride in my project “tinner” was so fulfilling and exciting that I would do it again every year if I had to. Now, I always look forward to packing the boat full of gear and heading out for an adventure on the water!<\/p>\n\n\n\n

        Before Hitting the Water in Your DIY Boat Project, Get Your Boater Safety Card<\/h2>\n\n\n\n

        With a safe boat, you also need to be a safe boater. So, before you shove off with your newly repaired or made-from-scratch DIY boat project, make sure you’ve taken your boater safety course to get your boater safety card. <\/p>\n\n\n\n

        BOATsmart! makes it easy! Our fun and engaging online boating education courses cover everything you need to know about safety equipment, right-of-way, and what to do if you (or someone else) falls overboard. <\/p>\n\n\n\n

        So, before the maiden voyage in your new-to-you boat, take BOATsmart!’s Canada course!<\/a> You’ll be prepared for safe boating adventures. <\/p>\n\n\n\n

        Content originally published June 2020. Content most recently reviewed for accuracy and relevancy August 21, 2024. <\/em><\/p>\n","protected":false},"excerpt":{"rendered":"

        This summer couldn\u2019t be wasted. Not a second of it. Fresh out of a (very) long year of university, I…<\/p>\n","protected":false},"author":10,"featured_media":126019,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[691],"tags":[692,790,689,791],"yoast_head":"\nDIY Boat Project: What to Know Before Taking One On | BOATsmart! Blog<\/title>\n<meta name=\"description\" content=\"We walk you through refurbishing an old tin boat as a DIY boat project. Includes the refurbishing process and gearing up for a day on the water.\" \/>\n<meta name=\"robots\" content=\"index, follow\" \/>\n<meta name=\"googlebot\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<meta name=\"bingbot\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.boatsmartexam.com\/blog\/boating-diy-project-what-you-need-to-know\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"DIY Boat Project: What to Know Before Taking One On | BOATsmart! Blog\" \/>\n<meta property=\"og:description\" content=\"We walk you through refurbishing an old tin boat as a DIY boat project. Includes the refurbishing process and gearing up for a day on the water.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.boatsmartexam.com\/blog\/boating-diy-project-what-you-need-to-know\/\" \/>\n<meta property=\"og:site_name\" content=\"BOATsmart! Blog\" \/>\n<meta property=\"article:published_time\" content=\"2023-06-23T13:09:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-08-21T20:30:53+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.boatsmartexam.com\/blog\/wp-content\/uploads\/sites\/2\/2020\/06\/tin-boat-boating-4.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1442\" \/>\n\t<meta property=\"og:image:height\" content=\"924\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.boatsmartexam.com\/blog\/#website\",\"url\":\"https:\/\/www.boatsmartexam.com\/blog\/\",\"name\":\"BOATsmart! Blog\",\"description\":\"Your destination for boating resources and stories to keep you safe and informed on the waterways.\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":\"https:\/\/www.boatsmartexam.com\/blog\/?s={search_term_string}\",\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.boatsmartexam.com\/blog\/boating-diy-project-what-you-need-to-know\/#primaryimage\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/www.boatsmartexam.com\/blog\/wp-content\/uploads\/sites\/2\/2020\/06\/tin-boat-boating-4.jpg\",\"width\":1442,\"height\":924},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.boatsmartexam.com\/blog\/boating-diy-project-what-you-need-to-know\/#webpage\",\"url\":\"https:\/\/www.boatsmartexam.com\/blog\/boating-diy-project-what-you-need-to-know\/\",\"name\":\"DIY Boat Project: What to Know Before Taking One On | BOATsmart! Blog\",\"isPartOf\":{\"@id\":\"https:\/\/www.boatsmartexam.com\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.boatsmartexam.com\/blog\/boating-diy-project-what-you-need-to-know\/#primaryimage\"},\"datePublished\":\"2023-06-23T13:09:00+00:00\",\"dateModified\":\"2024-08-21T20:30:53+00:00\",\"author\":{\"@id\":\"https:\/\/www.boatsmartexam.com\/blog\/#\/schema\/person\/d60b0dad723d76b31282be0a7adc65be\"},\"description\":\"We walk you through refurbishing an old tin boat as a DIY boat project. Includes the refurbishing process and gearing up for a day on the water.\",\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.boatsmartexam.com\/blog\/boating-diy-project-what-you-need-to-know\/\"]}]},{\"@type\":[\"Person\"],\"@id\":\"https:\/\/www.boatsmartexam.com\/blog\/#\/schema\/person\/d60b0dad723d76b31282be0a7adc65be\",\"name\":\"BOATsmart!\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","_links":{"self":[{"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/posts\/126013"}],"collection":[{"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/comments?post=126013"}],"version-history":[{"count":6,"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/posts\/126013\/revisions"}],"predecessor-version":[{"id":127145,"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/posts\/126013\/revisions\/127145"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/media\/126019"}],"wp:attachment":[{"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/media?parent=126013"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/categories?post=126013"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.boatsmartexam.com\/blog\/wp-json\/wp\/v2\/tags?post=126013"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}